MRF - Annealing Furnaces
Wire Annealing Furnace
- 2500°C (4500F) Maximum
- 18″ (457 mm) long heated section
- Up to twelve open ended wire feeding tubes
- Oxygen Monitor with audible alarm to monitor furnace atmosphere
Wire Oxidation Furnace
- 1200°C (2200°F) in air or inert gas
- 3 separate zones for custom temperature gradient
- Twelve open ended wire feeding tubes
- Encapsulated Ni-Cr heaters with ceramic shields
- End flanges adapt to a wire feed & pick-up system
Small heat treat furnace
- Maximum 2200 °C (4000 °F)
- 4″ x 6 ” x 8″ (101 mm x 152 mm x 203 mm) usable hot zone
- Excellent temperature uniformity
- Hydrogen, inert gas or vacuum Atmosphere
- Rough vacuum system, optional diffusion or turbo pumping system
- Tungsten mesh heating elements for long life
- Hydrogen wetting system with dewpoint control option
Medium heat treat furnace
- Maximum 2200°C (4000 °F)
- 12″ x 12″ x 12″ (305 mm x 305 mm x 305 mm) usable hot zone
- Hydrogen, inert gas or vacuum atmosphere
- Excellent temperature uniformity
- Mesh or rod heating element
- Roughing, diffusion, turbo or cryo pumping system
- Optional heat exchanger for rapid cooling
- User-friendly HMI Computer Interface
Large heat treat furnace
- Maximum 2200 °C (4000 °F)
- Hydrogen, inert gas or vacuum atmosphere
- Roughing or Diffusion pumping system
- 14″ x 14″ x 28″ usable hot zone (355mm x 355mm x 711mm)
- Excellent temperature uniformity
- Mesh or rod elements for long life and low cost
- Heat Exchanger for rapid cooling
- HMI Computer Interface
Extra Large Heat Treat Furnace
- Up to 1750 °C (3200 °F) maximum temperature
- 24″ x 24 ” x 24″ usable hot zone (610mm x 610mm x 610mm)
- 20″ High vacuum system
- Heat Exchanger for faster cool down
- Excellent temperature uniformity
- Front and rear access
- Large load capacity
- User-friendly HMI Computer Interface
- Load cart and other options available
