MRF - Heat treating, MIM, CVD
Production Furnaces
- Hardenin
- Annealing
- Brazing
- Sintering
- Stress-relieving
- Carbonizing
- Nitriding
- Heat Treating
- Metal Injection Molding (MIM)
- Chemical Vapor Deposition(CVD)
- Chemical Vapor Injection (CVI)
Specifications:
- Temperatures up to 3000 °C (5432 °F)
- Up to 8 cuft (226 l) hot zone sizes
- Excellent temperature uniformity
- High throughput vacuum systems
- Bottom, top or front loading designs
- SCADA fully automated runs
Small Heat treating furnace
- Maximum 2200 °C (4000 °F)
- 4″ x 6 ” x 8″ (101 mm x 152 mm x 203 mm) usable hot zone
- Excellent temperature uniformity
- Hydrogen, inert gas or vacuum Atmosphere
- Rough vacuum system, optional diffusion or turbo pumping system
- Tungsten mesh heating elements for long life
- Hydrogen wetting system with dewpoint control option
Medium Heat treating furnace
- Maximum 2200°C (4000 °F)
- 12″ x 12″ x 12″ (305 mm x 305 mm x 305 mm) usable hot zone
- Hydrogen, inert gas or vacuum atmosphere
- Excellent temperature uniformity
- Mesh or rod heating element
- Roughing, diffusion, turbo or cryo pumping system
- Optional heat exchanger for rapid cooling
- User-friendly HMI Computer Interface
Large Heat Treat Furnace
- Maximum 2200 °C (4000 °F)
- Hydrogen, inert gas or vacuum atmosphere
- Roughing or Diffusion pumping system
- 14″ x 14″ x 28″ usable hot zone (355mm x 355mm x 711mm)
- Excellent temperature uniformity
- Mesh or rod elements for long life and low cost
- Heat Exchanger for rapid cooling
- HMI Computer Interface
Extra Large Heat Treat Furnace
- Up to 1750 °C (3200 °F) maximum temperature
- 24″ x 24 ” x 24″ usable hot zone (610mm x 610mm x 610mm)
- 20″ High vacuum system
- Heat Exchanger for faster cool down
- Excellent temperature uniformity
- Front and rear access
- Large load capacity
- User-friendly HMI Computer Interface
- Load cart and other options available